Malt Master 2 Rollers พร้อมฐาน
Adjustable rollers at both ends to give uniform crush
2.6 kg hopper
Crank handle
Steel mounting board
12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging
10mm crank shaft
The Malt Master – Geared Grain Mill 2 Roller is constructed using materials that will last a lifetime and each mill unit now comes with steel mounting boards to make crushing grain easier over buckets containers or any mill catchment system.
Cold rolled steel for the rollers 6061 Aluminum body and hopper with long lasting steel bearings
The 3 roller geared design has the main advantage that it draws the grain better and gives improved throughput.
The cold rolled steel rollers are pair with high quality steel bearings to provide excellent consistent operation every batch.
Get excellent filtration in your mash tun with a precise crush that is easy to dial in on the adjustable rollers no matter what type of system you’re brewing on.
The blue plastic film seen in these photos is how the hoppers are packaged for shipment to reduce scratching ont he metal surfaces. It is to be removed before use.
*Please note the plastic bucket displayed in the photos is not included with the mill.
(5)
(4.5)
(3.83)